Vertex Standard VXR-9000 Series Repeater Features:
High Performance 50 W RF Power/Available 100 W Version (Optional)
The VXR-9000 provides 50 Watts of clean, reliable power output in its standard configuration. For applications requiring extended range, the optional VPA-9000H Power Amplifier increases the transmitter's power to 100 Watts.
Excellent Receiver Performance
The VXR-9000 is crafted to survive in the most difficult RF environments. Outstanding selectivity, intermodulation rejection, and spurious and image rejection performance ensure reliable service during peak spectrum congestion times.
Audio Companding per Channel
The VXR-9000's versatile configuration capability permits inclusion of narrow-band, compandered channels among wide-band, non-compandered channels.
DC Backup with Alert
Should DC power fail at the repeater site, the VXR-9000 will automatically revert to a backup DC power source, if available. Under emergency DC power, the repeater will transmit an alert message, to alert the communications supervisor that the DC power situation requires immediate attention at the repeater site.
Conservative Design for High Reliability
The large-diameter cooling fan (3+ inches) is thermostatically controlled, ensuring a stable temperature environment for the VXR-9000. Fan operation may be programmed via software (Off, Continuous, or Temperature-Controlled), and a "Malfunction" alarm is provided.
VERSATILITY
Ready For Rack Mounting
For easy integration into existing repeater sites, the VXR-9000 is shipped ready for mounting in a standard 19" rack.
32 Channel Capacity
The VXR-9000 may be dealer-programmed with up to 32 channels over a wide frequency range, and may be operated either in a "Repeater" or "Base Station" mode, depending on your application.
Six Dual-Function Programmable Keys on Front Panel
Over twenty different functions are available for selection and assignment to any of the six dual-function programmable keys on the front panel of the VXR-9000. These functions include Channel Up/Down, High/Low Power, Repeater/Base mode, Encryption On/Off, Transmit/Receive, Panel Lights On/Off, and many more.
DSUB 25-Pin Accessory Connector on Rear Panel
For convenient interfacing to external controllers or other accessories, the rear-panel DSUB 25-Pin Accessory Jack provides access to important repeater circuitry without the need for a specialized connector.
Programmable Message Banks
Enter date, subject, and notes such as programming or service memos, for recall at any time in the future.
SECURITY
Selectable Encryption Options
The VXR-9000 may be set up for either rolling code or inversion-type encryption (optional module required). The security required by your customer is available for easy installation.
Two-Tone Decode Startup
The VXR-9000 may be booted up using two-tone commands. Four popular two-tone formats are supported, and the precise frequencies of each of the two tones may be manually adjusted from 100 Hz to 5 kHz, in 0.1 Hz steps.
Five-Step Automatic Command Sequence
During certain operating events (such as Startup, switch from main DC to backup DC, etc.) the VXR-9000 may be programmed to undertake an automatic sequence of commands, so it can be configured for the particular event. For example, if DC fails and the repeater switches to emergency DC, the repeater can be set up to switch to Low Power, send a CW ID advising of the DC power situation, and other auto-command sequences, as well.
Vertex Standard VXR-9000 Series Repeater Packages
The Vertex Standard VXR-9000 Series Repeaters are available in the following VHF and UHF packages:
VXR-9000UA PKG-1
Rack Mount FM Repeater 50W (25W Continuous) 400-430 MHz 32CH
VXR-9000UD 100W PKG 1
Rack Mount FM Repeater, 100W Continous, 450-490MHz, 32CH
VXR-9000UD PKG-1
Rack Mount FM Repeater 50W (25W Continuous) 450-490 MHz 32CH
VXR-9000VA PKG-1
VXR-9000VA PKG-1
VXR-9000VC 100W PKG 1
Rack Mount FM Repeater, 100W Continuous, 148-174MHz, 32CH
VXR-9000VC PKG-1
Rack Mount FM Repeater 50W (25W Continuous) 148-174MHz 32CH
Vertex Standard VXR-9000 Series Repeater Downloads
Click here to view the Vertex Standard VXR-9000 Series Repeater Brochure
Click here to view the Vertex Standard VXR-9000 Owners Manual
|
