|
Alignment/Service Related
CT-88 The CT-88 cable is used in conjunction with the FIF-8 box to make adjustments to the alignment. This is for the VX-4000/VX-5500/VX-6000 mobiles. The CT-88 connects from the DB25 accessory port of the mobile, to the FIF-8 box interfaced to your PC.
FIF-8 Firmware Writer. Unit comes with a cable for the multi-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).
Base Stations
BSC-5000 Base Station Console. This is a "build to suit" type base station. It uses any band of VX-4000, VX-5500 or VX-6000 mobile. So, if you need mid power, high power, UHF or Lowband, we have you covered.
Features of the BSC-5000:
- Front mounted speaker - The large front mounted speaker makes for clear and loud audio as needed.
- Date / Time indicator - There is a built in Date / Time clock on the front display. 12 or 24-hour format is available.
- DC Backup - The BSC-5000 has rear connections for a DC backup input. In case you lose primary power, the DC backup battery input will take over.
Built in power supply - The BSC-5000 fully contains a 30 Amp DC power supply capable of delivering enough power to run even the 120 W Lowband VX-6000.
There is an optional unique desk microphone available as well, MD-11B8J.
Control Head
CNT-5000 Compact motorcycle control head for the VX-4000, VX-5500 and VX-6000 mobiles.
CNT-6000 Control Head for multi-head configurations. Requires T9206958A for dual head remotes.
VCS-5000 Channel Selector Control Panel extension
Cover Plate
RMK-4000B Cover plate for the RF Deck in Remote Applications
RMK-4000H Cover plate for the Control Head (Includes mounting bracket and hardware)
RMK-5000B Dedicated Motorcycle Control Head. Built for ease of use and all weather operation.
DC Cables
CT-96PS Ignition Sense Cable Ignition Sense Cable for the VX-4000, VX-5500 and VX-6000 mobiles.
E-DC-22 30 ft DC cable for VX-4000/-5500 mobiles.
DC Noise Filters
LF-1 Plug-In Line Filter
Encryption
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
Microphone
MD-12A8J/MULTI PIN PLUG DESKTOP MIC MD-12A8J/MULTI PIN PLUG DESKTOP MIC
MH-25B7A Vertex Mobile Microphone (Supplied w/radio)
MH-53A7A The MH-53A7A is a Noise-Canceling Microphone .
MH-53A8A Heavy Duty Weatherproof Noise Canceling DTMF Microphone for the CNT-5000 remote Control Head.
MH-53B7A The MH-53B7A is a Noise-Canceling Microphone with DTMF keypad.
MH-53C7A The MH-53C7A is a Heavy Duty Microphone .
Mounting Bracket
MMB-75 Mobile Mounting Bracket ( Supplied w/radio)
MMB-76 Locking Mobile Mounting Bracket
MMB-88 This is a mounting bracket, which is a base plate for the CNT-5000 and MLS-200.
The MMB-88 mounts to a motorcycle. The CNT-5000 and MLS-200 then mount to the MMB-88, side by side.
Power Supply
FP-1023 External Power Supply 23 Amp
Programming and Installation
CT-105 FIF-10 interface cable to connect: VX-530/600/800/900 Portables also VX-5500/VX-6000 Mobiles.
CT-70 Radio Programming Cable (Requires VX VPL-1 Cable)
CT-72 Cloning Cable (Set-to-Set Clone)
FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.
FRB-4D Alignment Interface Box (Required for All alignment) *
VX MPI Programming Kit for the MDC1200 and the FVP-35
VX VPL-1 Programming cable from PC. Check specific models for additional cable pigtails.
Remote Cable
CT-81 Remote Cable for RMK-4000 series (20 ft) (RF Deck to Control Head)
CT-82 Remote Cable for RMK-4000 series (8 ft) (RF Deck to Control Head)
CT-83 Remote Cable for RMK-4000 series (2 ft) (RF Deck to RF Deck)
CT-93 Remote Cable for RMK-4000 series (30 ft) (RF Deck to Control Head)
Signaling
CN-6 Connector Board (to be used with the installation of third-party options.)
F2D-8 Two-Tone Decoder. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000)
F5D-14 Five-Tone Enc/Dec Unit. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000)
FIF-7A Interface Board (for VX-4000 / 5500 / 6000 with FVP-25, FVP-35, F2D-8 & VTP-50 option boards) Replaces the FIF-7
FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.
VME-100 Board For MDC1200 Digital ANI
Speakers
MLS-100 External Speaker (12 Watt Peak)
MLS-200 12 W peak external weatherproof speaker.
Find out more information about the Vertex Standard VX-5500
|
