|
Alignment/Service Related
CN-3 SMA to BNC Adaptor
CT-124A VX-410/420 Firmware Cable. Requires FIF-8
CT-124B VX-410/420 Firmware Cable. Requires FIF-10A
FIF-8 Firmware Writer. Unit comes with a cable for the multi-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).
Alkaline Battery Cases
FBA-25A Alkaline Battery Case (Requires 6 AA Cells) (substitute for FNB-V57 battery)
Antennas
ATU-6D Antenna 450-485MHz
ATU-6DS Antenna 450-485 MHz / 3.5"
ATV-10A High Gain antenna, 145-155MHz (Red) / 10.5"
ATV-10B High Gain antenna, 150-160MHz (Brn) / 10.5"
ATV-10C High Gain antenna, 155-165MHz (Blk) / 10.5"
ATV-10E High Gain antenna, 165-175MHz (Org) / 10.5"
ATV-6B Antenna 150-163 MHz / 3.5"
ATV-6C Antenna 161-174 MHz / 3.5"
ATV-6XL 7" Untunned VHF antenna
ATV-8A Antenna 134-150MHz
ATV-8B Antenna 150-162MHz
ATV-8C Antenna 162-174MHz
Batteries
FNB-64 Ni-Cd Battery 7.2V/700mA
FNB-V57 Ni-Cd Battery 7.4V/1100mA
FNB-V57IS Intrinsically Safe NiCd Battery 7.2V/1100mAh
FNB-V67Li 7.2V 2000 mAh Lithium-Ion Battery for the VX-160 and VX-180 portables. (Requires the VAC-810 charger)
Belt Clip
CLIP-17C Belt Clip
Cases
LCC-420 Leather Case with belt loop
LCC-420S Leather Case with Swivel
Charger
NC-77B Wall Charger 117V $0.00 N/A
NC-77C 240 VAC 12-Hour Desktop Charger
VAC-10B 120 VAC 3-Hour Desktop Charger (Not recommended for use with LiIon Batteries)
VAC-6010B The VAC-6010 is a rugged 6-Unit Multi Charger that enables recharging of Ni-Cd and Ni-MH battery packs for VX-160/180/410/420 transceivers.
VAC-6010C The VAC-6010C is a rugged 6-Unit Multi Charger that enables recharging of Ni-Cd and Ni-MH battery packs for VX-160/180/410/420 transceivers.
VAC-6800B 6 Unit Multi-Rapid Charger, 120VAC
VAC-6800C 6 Unit Multi-Rapid Charger, 240VAC
VAC-6810B 120 VAC 6 Unit Multi-Rapid Charger
VAC-800 Rapid Charger Unit
VAC-800B 120 VAC 1-Hour Desktop Charger
VAC-800C 240 VAC 1-Hour Desktop Charger
VAC-810B 120 VAC 1.5 Hour Desktop Charger required for the FNB-V67Li High Capacity Battery.
VCM-1 Vehicular DC Charger Mounting Adaptor. Requires a charging base: VAC-400, VAC-800, etc.)
VCM-3 Vehicular Charger Mounting Adapter Kit for VAC-10
Encryption
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
Headsets and Surveillance
VC-25 VOX Headset VX-110/150/160/180/210
VH-115S Lightweight Headset w/ Boom
VH-215S Lightweight Padded Headset, Single Speaker
VH-225S Lightweight Padded Headset, Dual Speaker
Programming and Installation
CT-106 FIF-10 to VX-160/180/410/420 Cable
CT-27A Cloning Cable (Set-to-Set Clone)
CT-28A Pigtail Cable
CT-29A DB9 Cable
CT-42A Computer to Radio Programming Cables. (Contains CT-28A + CT-29A)
FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.
VX MPI Programming Kit for the MDC1200 and the FVP-35
Signaling
DVS-5 Digital Voice Storage Board (120 sec. max.)
FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.
VMDE-200 Board for MDC1200 ENCODE/DECODE
VME-100 Board for MDC1200 DIGITAL ANI
Speaker Microphones
MH-360S Compact Speaker Microphone for VX-210A, VX-160, and VX-180. Very similar to the MH-34D4B.
MH-37A4B Earpiece Microphone, Light Duty
MH-450S Speaker Microphone
MH-45B4B Speaker Microphone, Heavy Duty Public Safety Style w/Volume Switch, Intrinsically Safe
Find out more information about the Vertex Standard VX-420
|
