|
Alignment/Service
CT-92 FIF-8 cable to the Mobiles VX-3200/VX-4200/VX-4200/VX-2500. Used for updating firmware using the FIF-8 firmware writer.
DC cables
E-DC-22 30 ft DC cable for VX-4000/-5500 mobiles.
DC Noise Filters
LF-1 Plug-In Line Filter
Encryption
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
Microphones
MD-12A8J Desktop Microphone
MH-25A8J Standard Microphone
MH-64A8J Microphone DTMF Microphone
MH-700D DTMF Microphone, Black
Mounting Bracket
MMB-85 Quick Release Mobile Bracket for VX-4100/4200
Power Supply
FP-1023 External Power Supply 23 Amp
Programming and Installation
CT-104A Interface Cable for FIF-10A
FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.
T9101411 Cloning Cable
VX MPI Programming Kit for the MDC1200 and the FVP-35
VX VPL-1 Programming cable from PC. Check specific models for additional cable pigtails.
Signaling
DVS-5 Digital Voice Storage Board (120 sec. max.)
FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.
SRX-1 Interoperability Receiver Board. This is a UHF Sub-Receiver designed to be installed into the VHF VX-4100 or VX-4200 mobiles (VX-4104, VX-4204).
SRX-2 Interoperability Receiver Board. This is a VHF Sub-Receiver designed to be installed into the UHF VX-4100 or VX-4200 mobiles (VX-4107, VX-4207).
VMDE-200 BOARD FOR MDC1200 ENCODE/DECODE
VME-100 BOARD FOR MDC1200 DIGITAL ANI
Speakers
MLS-100 External Speaker (12 Watt Peak)
MLS-200 12 W peak external weatherproof speaker.
Find out more information about the Vertex Standard VX-4100/VX-4200
|
